THE RIGHT
SERVICE FOR YOU
PUTTING FABRIC FIRST

THE RIGHT
SERVICE FOR YOU
PUTTING FABRIC FIRST

THE RIGHT
SERVICE FOR YOU
PUTTING FABRIC FIRST

Renders - evolved supplies

LogoFassa_EN (2)

The range of Fassa Bortolo Rendering Products from Evolved Supplies is  a complete options of finishes and base renders to suit all requirements, either for new or refurbishment of an old property, that is cost effective and protects the outside of the building from water penetration.

The different renders that Evolved Supplies offer are broken down into Lime Based Renders, Lime & Cement Based Renders, Cement Renders and Monocouche Renders.

External Render Systems

Fassa Bortolo Lime Based Render for a Smooth Finish

KB 13_newBase Coat onto Brick or Blockwork: KB 13

 Description Biological lime base coat plaster for interiors and exteriors with marmorino effect. KB 13 is used as base coat plaster on bricks, concrete blocks, rough concrete etc. Supplied in 30 kg bags.

 

Mesh embedded into Base Coat: Fassanet 160Rete cappotto new 2012

 Description FASSANET 160 reinforcing mesh used to reinforce the smoothing coat applied on plasters or the base coat applied on thermal insulation panels before applying the finish

 

Top Coat to Base Coat & Mesh: S 605 S 605

 Description White biological finishing plaster for exterior walls with marmorino effect. S 605 can also be used as a white finishing plaster for restoring damp walls, or whenever excellent breathing properties are required. Supplied in 25 kg bags.

 

Primer to Base Coat: FS 412FS412

 Description Primer for silicone resin coating cycles. FS 412 is used as substrate insulation, primer or stabiliser before applying the finishing products of the SILICONE RESIN SYSTEM, both paints and finish coat plasters, without affecting the breathability of the substrate. Supplied in 16 litres tubs.

 

Finishing Coat: PS 403PS 403

Description Highly breathable siloxane finish for exteriors use. PS 403 is used as a top quality protective and decorative paint, white or coloured, on finishing plasters for exteriors, especially on renovation systems, when a long lasting product is required. Supplied in 14 litre tubs [see colour chart].

 

Fassa Bortolo Lime Based Render for a Textured Finish

Base Coat onto Brick or Blockwork: KB 13 KB 13_new

 Description Biological lime base coat plaster for interiors and exteriors with marmorino effect. KB 13 is used as base coat plaster on bricks, concrete blocks, rough concrete etc. Supplied in 30 kg bags.

 

Mesh embedded into Base Coat: Fassanet 160Rete cappotto new 2012

 

 Description FASSANET 160 reinforcing mesh used to reinforce the smoothing coat applied on plasters or the base coat applied on thermal insulation panels before applying the finish

 

Top Coat to Base Coat & Mesh: S 605 S 605

 Description White biological finishing plaster for exterior walls with marmorino effect. S 605 can also be used as a white finishing plaster for restoring damp walls, or whenever excellent breathing properties are required. Supplied in 25 kg bags.

 

Primer to Base Coat: FX526 FX 526

 Description FX 526 Pigmented primer undercoat. FX 526 is used as primer undercoat-filler, especially formulated for aqueous coatings in dispersion in RX 561 whether synthetic, mineral or siloxane. Thanks to its covering power it creates a uniform, coloured surface; at the same time, the fine aggregate ensures better adhesion of thick finish coatings both on the External Thermal Insulation Composite System and on already painted walls. FX 526 is supplied in 14 litre containers, in white and the light tones of Paint Line colour chart

 

Finishing Coat: RX 561RX 561

Description Rustic acrylic siloxane coating Textured in 1mm, 1.5mm and 2mm aggregates. RX 561 is used as protective and decorative coating for exteriors on Lime or lime-cement base coat plaster and on walls insulated with the External Thermal Insulation Composite System. Supplied in 25 kg plastic tubs in Tints [see colour chart and “warnings” section]

  

Fassa Bortolo Lime-Cement Based Render for a Smooth Finish

Base Coat onto Brick or Blockwork: Ki 7KI 7_new

Description Fibre-reinforced lime and cement base coat plaster with water repellent properties. Fibre-reinforced Ki 7 is used as a foundation plaster on bricks and honeycombed bricks, concrete blocks, rough concrete, expanded clay etc. For special underlays follow the instructions of the supplier. Supplied in 30 kg bags

 

Mesh embedded into Base Coat: Fassanet 160Rete cappotto new 2012

 Description FASSANET 160 reinforcing mesh used to reinforce the smoothing coat applied on plasters or the base coat applied on thermal insulation panels before applying the finish

 

Top Coat to Base Coat & Mesh: IP 10 (1mm)IP10

Description Lime and cement based finish coat plaster for exteriors applications. IP 10 is used as a float-finish plaster on lime and cement base coat plasters, such as Ki 7. IP 10 finish coat plaster reduces the occurrence of hairline cracks more than smooth finishes. Supplied in 30 kg bags.

 

Primer to Base Coat: FX526 FX 526

 Description FX 526 Pigmented primer undercoat. FX 526 is used as primer undercoat-filler, especially formulated for aqueous coatings in dispersion in RX 561 whether synthetic, mineral or siloxane. Thanks to its covering power it creates a uniform, coloured surface; at the same time, the fine aggregate ensures better adhesion of thick finish coatings both on the External Thermal Insulation Composite System and on already painted walls. FX 526 is supplied in 14 litre containers, in white and the light tones of Paint Line colour chart.

 

Finishing Coat: PX 505PX 505

 Description Acrylic-siloxane filling finish. PX 505 is used as white or coloured decorative paint on finish coat plaster for exteriors on new or old lime-cement, concrete, etc. substrates. It can also be applied over existing paints and finish coat plasters, as long as these are intact and not lose or crumbling. Supplied in 5 & 14 litre tubs [see colour chart].

 

Fassa Bortolo Lime-Cement Based Render for a Textured Finish

Base Coat onto Brick or Blockwork: Ki 7 KI 7_new

 Description Fibre-reinforced lime and cement base coat plaster with water repellent properties. Fibre-reinforced Ki 7 is used as a foundation plaster on bricks and honeycombed bricks, concrete blocks, rough concrete, expanded clay etc. For special underlays follow the instructions of the supplier. Supplied in 30 kg bags

 

Mesh embedded into Base Coat: Fassanet 160Rete cappotto new 2012

 Description FASSANET 160 reinforcing mesh used to reinforce the smoothing coat applied on plasters or the base coat applied on thermal insulation panels before applying the finish

 

Top Coat to Base Coat & Mesh: IP 10 (2 or 3mm) IP10

Description Lime and cement based finish coat plaster for exteriors applications. IP 10 is used as a float-finish plaster on lime and cement base coat plasters, such as Ki 7. IP 10 finish coat plaster reduces the occurrence of hairline cracks more than smooth finishes. Supplied in 30 kg bags.

 

Primer to Base Coat: FX526 FX 526

 Description FX 526 Pigmented primer undercoat. FX 526 is used as primer undercoat-filler, especially formulated for aqueous coatings in dispersion in RX 561 whether synthetic, mineral or siloxane. Thanks to its covering power it creates a uniform, coloured surface; at the same time, the fine aggregate ensures better adhesion of thick finish coatings both on the External Thermal Insulation Composite System and on already painted walls. FX 526 is supplied in 14 litre containers, in white and the light tones of Paint Line colour chart.

 

Finishing Coat: PX 505PX 505

 Description Acrylic-siloxane filling finish. PX 505 is used as white or coloured decorative paint on finish coat plaster for exteriors on new or old lime-cement, concrete, etc. substrates. It can also be applied over existing paints and finish coat plasters, as long as these are intact and not lose or crumbling. Supplied in 5 & 14 litre tubs [see colour chart].

 

Fassa Bortolo Cement Based Render for a Smooth Finish

Base Coat onto Brick or Blockwork: Ki 7 KI 7_new

 Description Fibre-reinforced lime and cement base coat plaster with water repellent properties. Fibre-reinforced Ki 7 is used as a foundation plaster on bricks and honeycombed bricks, concrete blocks, rough concrete, expanded clay etc. For special underlays follow the instructions of the supplier. Supplied in 30 kg bags

 

Mesh embedded into Base Coat: Fassanet 160Rete cappotto new 2012

 Description FASSANET 160 reinforcing mesh used to reinforce the smoothing coat applied on plasters or the base coat applied on thermal insulation panels before applying the finish

 

Top Coat to Base Coat & Mesh: LC 7 (0.1mm) LC 7_new

 Description White cement-based smooth coat. LC 7 is used as smoothing coat directly on to the base coat For exterior application we suggest adding about 5% of our special additive AG 15 to the product. Supplied in 33 kg bags.

 

Primer to Base Coat: FX526 FX 526

 Description FX 526 Pigmented primer undercoat. FX 526 is used as primer undercoat-filler, especially formulated for aqueous coatings in dispersion in RX 561 whether synthetic, mineral or siloxane. Thanks to its covering power it creates a uniform, coloured surface; at the same time, the fine aggregate ensures better adhesion of thick finish coatings both on the External Thermal Insulation Composite System and on already painted walls. FX 526 is supplied in 14 litre containers, in white and the light tones of Paint Line colour chart.

 

Finishing Coat: PX 505PX 505

 Description Acrylic-siloxane filling finish. PX 505 is used as white or coloured decorative paint on finish coat plaster for exteriors on new or old lime-cement, concrete, etc. substrates. It can also be applied over existing paints and finish coat plasters, as long as these are intact and not lose or crumbling. Supplied in 5 & 14 litre tubs [see colour chart].

 

Fassa Bortolo Cement Based Render for a Textured Finish

Base Coat onto Brick or Blockwork: Ki 7 KI 7_new

 Description Fibre-reinforced lime and cement base coat plaster with water repellent properties. Fibre-reinforced Ki 7 is used as a foundation plaster on bricks and honeycombed bricks, concrete blocks, rough concrete, expanded clay etc. For special underlays follow the instructions of the supplier. Supplied in 30 kg bags

 

Mesh embedded into Base Coat: Fassanet 160Rete cappotto new 2012

 Description FASSANET 160 reinforcing mesh used to reinforce the smoothing coat applied on plasters or the base coat applied on thermal insulation panels before applying the finish

 

Top Coat to Base Coat & Mesh: LC 7 (0.1mm) LC 7_new

 Description White cement-based smooth coat. LC 7 is used as smoothing coat directly on to the base coat For exterior application we suggest adding about 5% of our special additive AG 15 to the product. Supplied in 33 kg bags.

 

Primer to Base Coat: FX526 FX 526

 Description FX 526 Pigmented primer undercoat. FX 526 is used as primer undercoat-filler, especially formulated for aqueous coatings in dispersion in RX 561 whether synthetic, mineral or siloxane. Thanks to its covering power it creates a uniform, coloured surface; at the same time, the fine aggregate ensures better adhesion of thick finish coatings both on the External Thermal Insulation Composite System and on already painted walls. FX 526 is supplied in 14 litre containers, in white and the light tones of Paint Line colour chart.

 

Finishing Coat: RX 561RX 561

 Description Rustic acrylic siloxane coating Textured in 1mm, 1.5mm and 2mm aggregates. RX 561 is used as protective and decorative coating for exteriors on Lime or lime-cement base coat plaster and on walls insulated with the External Thermal Insulation Composite System. Supplied in 25 kg plastic tubs in Tints [see colour chart and “warnings” section]

 

Fassa Bortolo Fassacouche Single Coat Monocouche Render Textured Finish

Single Coat onto Brick or Blockwork: Fassacouche FASSACOUCHE

 Description Fassacouche plaster is the thinnest monocouche system on the market, intended primarily to protect substrates against physical and climatic attack and to keep buildings waterproof. Though monocouche plaster was originally formulated to waterproof and decorate masonry walls, today it offers excellent decorative flexibility as well as quick and easy application one-layer wall render. Supplied in 25Kg bags.